Ad pad clips snap into 1-1/4" price rails and have a shaft, at a right angle to the price rail, from which take-one pads or signage can be hung. The printed material requires a 1/4 hole to fit over the ad-pad clip's shaft. The flexible, arrow-head shaped end of the shaft holds the printed material in place. This part is also available with a foam tape applied to the base for an extra-secure bond to a price rail, or for adhering to other surfaces.
Canoe clips are fasteners that insert into 1/4" holes for secure, long-term signage. The clips can be removed and reused occasionaly, but their extra-secure grip is best suited for displays that are not often changed.
Dart clips insert into 1/4" holes in sign and display materials as well as in pegboard and store shelving. The clips grip securely and yet are more easily removed for sign changes than the similar product, canoe clips.
The finned diverse sign foot is an extremely versatile, T-shaped sign base that accepts stock as thin as .080" and as thick as .375 (3/8)". A unique staggered fin design accounts for the broad range of stock the sign foot will hold. Removable metal shelf tapeÂ on the base makes the sign foot extra stable.
Flat cap screws are quick-assembly binding shafts which push together to close and, though removable, offer a more tamper-resistant bond than the similar viking hat screws. Available in four lengths, the flat cap screws will fasten together materials ranging from approximately 1/8" to1-3/8".
Metal beaded chain is often used to connect product samples and swatches to store shelving. There are many other uses for this product as well. Use metal beaded chain to connect items to displays, to connect multi-panel hanging signs, or in any other scenario where a flexible, reusable connector is required.
Nylon cable ties are used to affix signs to store shelving, or to connect tags to product. The cable ties are tamper resistant since they must be cut to be removed. Easily adjusted, cable ties are well suited to rapid hand assembly. The large cable ties (36" and 48") are often used to connect coroplast signs to poles, both indoors and out.
Nylon locking straps, also known as security loops, are used to affix tags to product. The straps are tamper resistant since they must be cut to be removed. The straps are well suited to rapid hand assembly and are available in two lengths.
The self-piercing channel flag-holders snap into standard 1-1/4" shelf channels and support small signs by piercing sign stock with with a hinged piercing mechanism. Once pierced, signs can be rotated for desired position.
The shelf edge adapter snaps into 1-1/4" shelf edge channels and grips your sign with peel and stick permanent foam tape. The shelf edge adapter slides back and forth in the price channel allowing for quick sign positioning.
Shelf push-pins fasten printed materials and merchandising items onto perforated metal store shelves. The tapered pins pass easily through your materials and insert into shelf holes. They then spread open gripping the shelf and holding your materials in place.
The shelf-channel sign-holder snaps into the 1-1/4" front-channel of standard retail shelves and holds small signs in place with two integral gripping tabs, or with the right-angle sign-holding slot. No tape is required, making the SEC-1T reusable and ideal for frequently changing promotions.
For rapid assembly of displays and signage, Popco offers VELCROÂ® hook and loop dots. The dots, also known as 'coins", are adhesive-backed. They remove easily from the continuous roll of liner material. VelcroÂ® dot sizes range from 3/8" diameter to 7/8" diameter.
For rapid assembly of displays and signage, Popco offers pre-mated VELCROÂ® hook-and-loop squares on the roll, kiss-cut in two lengths. Adhesive backed, with a removable liner, pre-mated VELCROÂ® squares are a popular product for a wide variety of point-of-purchase applications.
For rapid assembly of displays and signage, Popco offers pre-mated VELCROÂ® hook and loop pieces. The pieces are adhesive-backed, with removable liner on both the hook and loop sides. Popco's stock dimension is 1" x 3". Other custom widths and lengths are available.
Viking screws are rapid-assembly binding screws that push together to close and unscrew to remove. Available in five lengths, the viking screws will fasten together materials ranging from approximately 0" to 1-3/4".
Popco's new, proprietary x-mas tree clips are now available in two lengths for binding materials from .180" (4.7mm) to .600" (15.2mm). Both lengths fit 1/4" diameter holes and are meant to bind display materials together, or to mount materials to 1/4" holes in store shelving.
Popco's new series 6 x-mas tree clips compliment our other varieties of x-mas tree clips with a variation on head size and binding capacity. The series 6 clips feature a head size of .46" and a binding capacity from .10" to .60". The series 6 fits 3/16" diameter holes.
Popco's new series 7 x-mas tree clips compliment our other varieties of x-mas tree clips with a variation on head size and binding capacity. The series 7 clips feature a head size of .94" and a binding capacity from .050" to .44". The series 7 fits 3/16" diameter holes.